Hotline:

0595-85512228

 

Service
Hotline
0595-85512228
Team:
Sservice
QQ:
Service time:
8:30 - 17:30

Copyright @ Jinjiang Shangli Machinery Equipment Manufacturing Co., Ltd..All rights reserved    闽ICP备19011283号   Powered by:300.cn

公司介绍

NEWS INFORMATION

>
>
>
Talking about how to clarify the screw conveyor

Talking about how to clarify the screw conveyor

Page view
Screw conveyor, commonly known as auger, is a kind of conveying equipment widely used in minerals, feed, grain and oil, and construction industry. It is simple in structure, but it often encounters problems during the course of specific operations. When used, the screw conveyor often loses its working efficiency due to irregular operation, which shortens its service life. Then we should pay attention to the screw conveyor, how to correct the installation? Xiaobian will give you a specific explanation, I hope to help everyone.
 
The temperature of the reducer bearing rises too fast after driving, and there is abnormal noise, accompanied by vibration of the motor and reducer.
 
1. The bearing temperature at the output shaft of the reducer is high. The temperature at the input shaft is normal. This is because the center of the screw shaft is offset or the bearing at the output shaft of the reducer is burnt, and the first and the end bearing housings are loose. The coupling between the output shaft of the reducer and the screw shaft needs to be loosened to recalibrate the installation.
 
2. The bearing temperature at the output shaft of the reducer is normal, and the temperature at the input shaft is high. This is due to the looseness of the motor fixing assembly or the bearing burnout at the output shaft of the reducer. It is necessary to loosen the coupling between the input shaft of the reducer and the motor to re-correct the installation.
 
3. The temperature of the output of the reducer and the input bearing are high. This is because the fixing bolt of the reducer is loose or the bearings at both ends of the reducer are burnt. It is necessary to loosen the couplings at both ends of the reducer and re-calibrate the installation!
 
It can be known from the above: I believe that everyone has a certain understanding of the solution of the screw conveyor. We regularly maintain and maintain the screw conveyor to increase its efficiency and extend its service life. If you want to know more about screw conveyors, please pay attention to me!